Removing rubber coated gloves safely is important to minimize the risk of contamination or exposure to potentially harmful substances. Here’s a step-by-step guide on how to remove rubber coated gloves safely:
- Pinch and Hold: Pinch the outside of one glove near the wrist or cuff area using your gloved hand. Avoid touching the bare skin underneath the glove.
- Peel Off: Gently peel the glove off by pulling it away from your hand, turning it inside out as you go. Continue rolling it downward, ensuring that the contaminated outer surface is folded inward.
- Hold in Gloved Hand: Once the first glove is removed, hold it in the palm of your gloved hand. Be careful not to touch the inside of the glove or the contaminated surface.
- Slide Fingers: With the glove held in your gloved hand, slide your fingers of the bare hand under the cuff of the second glove. Avoid touching the outside of the second glove.
- Peel Off Second Glove: Using a pinching and rolling motion, pull the second glove off from the inside, turning it inside out as you go. This will encase the first glove completely.
- Dispose of Gloves: Dispose of the used gloves in an appropriate waste container or as per the disposal guidelines set by your organization or local regulations. Follow any specific disposal procedures for potentially hazardous materials.
- Hand Hygiene: After removing the gloves, practice proper hand hygiene. Wash your hands thoroughly with soap and water for at least 20 seconds. If soap and water are not available, use an alcohol-based hand sanitizer.
Remember, removing gloves properly is crucial to prevent cross-contamination. Avoid touching your face, eyes, or any other surfaces while removing gloves, as this can transfer contaminants. Following these steps will help maintain a safe and hygienic environment when removing rubber coated gloves.
